EDM Taping Electrode
Nkọwa ngwaahịa
Mkpado ngwaahịa
Ningbo De-Shin na-enye eriri eriri eriri eriri eriri maka usoro nhazi EDM.Ngwaahịa ndị a na-enye nwere ihe onwunwe nke eri edo edo, dị ọcha & agba na-agbanwe agbanwe na ezigbo mma kwụsiri ike.Ọ nwere ike iji machining niile conductive ihe dị ka C45C, SKD11, ọcha ígwè, tungsten ígwè, ọla kọpa ngwaahịa, aluminum, wdg
Ihe dị: ọla kọpa (Cu), tungsten ọla kọpa (WCu) (dị ka W70, W75, W80, W85, wdg).
Nkọwapụta:M1.2, M1.6, M2, M2.5/2.6, M3, M3.5, M4, M5, M6, M7, M8, M9, M10, M12, M14, M16, M18, M20, M22, M24; M27, M30…
Ọkụ:rụtụ aka na ọkọlọtọ anyị dị n'okpuru ma ọ bụ nwee ike ime ya dịka nke gị si dị.
Ogologo eriri:35mm, 40mm, 45mm, 50mm, 60mm, wdg.
Ogologo Electrode:45mm, 50mm, 55mm, 60mm, 75mm, wdg.
| nkọwa | pitch (mm) | shank dia. (mm) | eri dia. ±0.1 (mm) | eri ogologo ±2 (mm) | ngụkọta ogologo ±2 (mm) | eri ogologo ±2 (mm) | ngụkọta ogologo ±2 (mm) | eri ogologo ±2 (mm) | ngụkọta ogologo ±2 (mm) |
| M1.2 | 0.25 | 0.8 | 0.8 | 8 | 20 | ||||
| M1.6 | 0.35 | 1.2 | 1.2 | 15 | 45 | ||||
| M2.0 | 0.4 | 1.5 | 1.5 | 20 | 45 | ||||
| M2.5/2.6 | 0.45 | 1.8 | 1.8 | 25 | 45 | ||||
| M3 | 0.5 | 2.2 | 2.2 | 35 | 55 | 40 | 60 | 50 | 75 |
| M3.5 | 0.6 | 3.0 | 2.8 | 35 | 55 | 40 | 60 | 50 | 75 |
| M4 | 0.7 | 3.0 | 3.0 | 35 | 55 | 40 | 60 | 50 | 75 |
| M5 | 0.8 | 4.0 | 4.0 | 35 | 55 | 40 | 60 | 50 | 75 |
| M6 | 1 | 5.0 | 4.8 | 35 | 55 | 40 | 60 | 50 | 75 |
| M7 | 1 | 6.0 | 5.8 | 35 | 55 | 40 | 60 | 50 | 75 |
| M8 | 1.25 | 8.0 | 6.5 | 35 | 55 | 40 | 60 | 50 | 75 |
| M9 | 1.25 | 8.0 | 7.7 | 35 | 55 | 40 | 60 | 50 | 75 |
| M10 | 1.5 | 8.0 | 8.0 | 35 | 55 | 40 | 60 | 50 | 75 |
| 10 | 8.5 | 35 | 55 | 40 | 60 | 50 | 75 | ||
| M12 | 1.75 | 10 | 10 | 35 | 55 | 40 | 60 | 50 | 75 |
| M14 | 2 | 12 | 11.7 | 35 | 55 | 40 | 60 | 50 | 75 |
| M16 | 2 | 14 | 13.7 | 35 | 55 | 40 | 60 | 50 | 75 |
| M18 | 2.5 | 16 | 15.2 | 35 | 55 | 40 | 60 | 50 | 75 |
| M20 | 2.5 | 18 | 17.2 | 35 | 55 | 40 | 60 | 50 | 75 |
| M22 | 2.5 | 20 | 19.2 | 35 | 55 | 40 | 60 | 50 | 75 |
| M24 | 3 | 22 | 20.6 | 35 | 55 | 40 | 60 | 50 | 75 |
| M27 | 3 | 24 | 23.6 | 35 | 55 | 40 | 60 | 50 | 75 |
| M30 | 3.5 | 26 | 26 | 35 | 55 | 40 | 60 | 50 | 75 |
